| 性能特点 |
该生产线是将较薄金属卷板整平、剪切成块状板材的专用设备。通常由上料小车、开卷机、托板压引装置、 校平主机、活动过桥、导向纠偏装置、定尺机构、覆膜装置、剪板机、输送工作台、气动排料架、液压升降 垛料台、运料滚道台及液压系统、电气控制系统等组成，协同动作PLC控制。
本设备主要用来加工冷轧碳钢卷板、不锈钢卷板及有色金属卷板等，可以根据客户的需求和工件加工的需要，选用六重式、四重式或二重式校平主机。
根据客户要求，校平可采用初、精两级校平机校平；定长送剪可采用普通机械电器协同动作、数字变频技术 或交流伺服技术；剪板机可配用普通机械、液压机型，电磁离合器、气动离合器传递动力的高速闸式剪板机，移动跟踪的追剪以及回转式飞剪机。配套相关成型机床可作更大范围功能延伸。 | |
| Features: |
This line is professional equipment for leveling and cutting plate to pieces for thin metal plate, It usually consists of feeding car, uncoiler, pressing & traction device, level machine, movable bridge, guide correction device, cut-to-length mechanism, film coating device, shearing machine, transition table, pneumatic discharging frame, hydraulic lifting stack table, transport roll table, and hydraulic, pneumatic, electrical control system etc. Control with PLC.
This equipment is mainly for processing cold carbon coil, stainless steel coil, and color metal coil etc, can choose optional 6-high, 4-high, or 2-high level machine according to customer* s request or needs of working plates.
According to customer* s request, the level machine can use rough and precision to straightening, the cut-to-length can adopt common mechanical electronic, digital frequency , and AC servo technology; Shearing machine can choose options Imechanical and hydraulic type, high speed guillotine shearing machine which is droved by electromagnetic or pneumatic clutch, movable catching shear and return flying shearing machine. | |
|
 |
|
 |
|
| 主要技术参数 Specifications |
| 项目 Name |
单位 Unit |
可选择范围 Optional range |
| 加工板厚 Plate thickness |
mm |
0.3-1.5 0.5-3.0 0.6-4.0 |
| 标准板宽 Standard width |
mm |
1000 1250 1600 2000 |
| 开卷机承重 Uncoiled weight |
T |
6-25 |
| 校平精度 Leveling precision |
mm/m2 |
1.2 |
| 定尺精度 Cut-to-length precision |
mm/2m |
±0.5-1.0 |
| 机组最高线速度 Highest line speed |
m/min |
20-60 |
| 机组总功率 Total power |
Kw |
85-150 | | |
|
| 本表所列参数，不作为产品检验依据，仅供产品选型参考。如出现与产品实际数据有不一致处，应遵照说明书或双方的技术协议约定。 |
| The data in file not as inspection evidence, just reference for model chosen. If any difference with actual data, please refer to manual or technical agreement by both parties. | |
